Everlast Poweri-MIG 140E MIG Welder Review

A strong and powerful MIG Welder that is IGBT inverter driven is Everlast Poweri-MIG 140E MIG Welder. The Insulated gate bipolar transistor of Everlast allows for low voltage input and high output. This one is from the economy line of inverted MIG Welders that is high on capacity albeit low on price. It is spool gun ready so if you want to weld aluminum it is suitable for that.

Features of Everlast Poweri-MIG 140E MIG Welder

Cast alloy driver roller- The cast alloys give a solid base and keep the weigh minimum at the same time. This driver roller is sturdy and needs low maintenance.

High duty cycle- With 135 A/21V voltage capacities and at 35% Duty Cycle it is termed as a powerhouse. In comparing to transformer based Mig welder it has superior duty cycle those welders have 20% duty cycle at 90 amps wherever is Everlast Poweri-MIG 140E MIG Welder offers 50% more duty cycle at 50% higher power consumption. So those looking for uninterrupted MIG Welding experience for long can go for this.

Smaller footprint- It weights incredibly less in comparison to regular welders. The figure is 20 lb, the diameter is 8" which is standard for the industry, still, the overall dimensions are less that is only 17 x 8 x 14 inches.


  • 5 years warranty on parts and labor.
  • 4, 6, and even an 8-inch spool compatible
  • No transformers buzz while in action.
  • Spool Gun ready
Everlast Poweri-MIG 140E MIG Welder


Some accessories are crap ie-ground clamp
Solution-That is a harsh truth, however, the price justifies the poor quality accessories. Mig gun is great and consumables are perfect for first few welds. For a better support, you can shop for a better clamp.

It is ok with welding flat lap joints, but for welding even mild slope it runs. Even adjusting wire speed and temp for crazy range gave results of poor penetration or high splatters, but it either won't penetrate splatters or runs.
Solution- The machines come with electrode positive when one flip the connections inside the door above the drive mechanism it transforms to negative. This negative electrode will benefit from welding at slopes.

Frequently Asked Questions

Q- Is it china made?
Ans- Yes it is, that justifies thrice but the quality is as good as the USA.

Q- What type of control of wire speed and voltage exist?
Ans- It has an easy and step-less control of wire speed and voltage with no tapped settings. It has clockwork type settings easy to operate and understand.

Q- What is an IGBT?
Ans- IGBT is a switch operated electric system. It allows for power to flow in the when on. it stops power flow when an Off state. An IGBT applies the voltage to a semiconductor component, this process changes electric properties in a way to block or create an electrical path.


With .023"-.030" standard roll drive diameter and Tweco Style Gun (Tips and nuzzle) Everlast can be operated with both 4" and 8" Wire Spools. If you are a hobbyist or DIY welder than this is your thing.With help of Argon gas and spool gun, it will even weld aluminum. With 4 out of 5 stars on Amazon, this Everlast Poweri-MIG 140E MIG Welder is an easy choice.

Click Here to Leave a Comment Below 1 comments